BPG-50 BPG-50 Bulkhead Pipe Gland 50mm OD The Barton Bulkhead Pipe Gland BPG-50 is for pipes with an outer diameter between 45-50mm (13/4 – 2″). The required hole cutter is 60mm. It has 4 M6 fasteners supplied. These glands give a water and vapor-proof seal between bulkheads. They are flexible and will accommodate curved surfaces and pipe entry at an angle. They are easy to fit and fully serviceable in situ. Features: Vapor and watertight construction Seals the aperture for pipe and tube integration Co

<p><strong>BPG-50 Bulkhead Pipe Gland 50mm OD</strong></p><p data-pasted="true">The Barton Bulkhead Pipe Gland BPG-50 is for pipes with an outer diameter between 45-50mm (13/4 &ndash; 2&Prime;). The required hole cutter is 60mm. It has 4 M6 fasteners supplied.</p><p>These glands give a water and vapor-proof seal between bulkheads. They are flexible and will accommodate curved surfaces and pipe entry at an angle. They are easy to fit and fully serviceable in situ.</p><p><strong>Features:</strong></p><ul><li>Vapor and watertight construction</li><li>Seals the aperture for pipe and tube integration</li><li>Compatible with angled pipes and curved surfaces</li><li>Sealed but fully serviceable and adjustable</li><li>Stainless Steel and Nitrile Rubber (BS2751)</li><li>Suitable for bulkheads up to 35mm thick</li></ul> <!--- cis2:m2hqmpZo --->