PT-24-60W PT-24-60W Battery Charger Marine battery charging technology for 24V systems aboard workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing a three-stage charge process for recovery and conditioning, maximizing performance, and extending battery life. A selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for voltage ba

<p><strong>PT-24-60W Battery Charger</strong></p><p>Marine battery charging technology for 24V systems aboard workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing a three-stage charge process for recovery and conditioning, maximizing performance, and extending battery life.</p><p>A selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for voltage based on changes in the batteries&rsquo; ambient temperature. All models are housed in a stainless steel case with a white powder coat finish, and the internal circuitry is polyurethane coated for corrosion resistance.</p><p><strong>Features:</strong></p><ul><li>24V model</li><li>Circuitry provides three-stage charging &ndash; bulk, absorption, float</li><li>Gel-cell/Flooded Lead-acid/AGM battery type switch selects charge/float voltages</li><li>Multiple isolated output banks; ammeter indicates total output current</li><li>The optional sensor adjusts output voltage based on battery temperature</li><li>Current limiting prevents damage from overloading</li><li>Use as a power supply; can power loads without a battery in line</li><li>Built to last &ndash; stainless steel case with a white powder coat finish with an optional drip shield and marinized internal circuitry</li><li>Protection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield</li><li>Install in conjunction with PT-MCU for additional control and monitoring</li><li>ABS type approval for battery charging and power supplies</li></ul><p><strong>Specifications:</strong></p><ul><li>Input VAC (50-60 Hz.): 207-253</li><li>Input Amps @ Full Load: @ 115 VAC: NA, @ 230 VAC: 13</li><li>Power Factor: .7</li><li>Max Output Amps: 60</li><li>Output Banks: 3</li><li>Battery Capacity (Amp-Hours): 120-600 &nbsp; &nbsp;</li><li>Operating Temp. Rating Reference: T-4</li><li>Case Size Reference: A-5</li><li>Case Size (H x W x D): 17.5E x 12 x 7.2E inches (44.5E x 30.5 x 18.3E centimeters) *Note with Dripshield installed E add 2&rdquo; (5.08 cm) to height and 1&rdquo; (2.54 cm) to depth</li><li>Weight Lbs./Kg: 24.1/11</li><li>Optional Temp. Sensor Model: TP &nbsp; &nbsp;</li><li>Remote Panel Model: N/A</li><li>Compliance Reference: EN, CE, ABS</li></ul><p><strong>Temperature Rating References:</strong></p><ul><li>Temperature: -20 degrees C to +50 degrees C &nbsp; &nbsp;</li><li>Derate Linearly From Full output</li></ul><p><strong>Nominal Output Voltages at Gel/Flooded Switch Settings (without Temperature Compensation):</strong></p><ul><li>Gel-Cell: 28.0 VDC Charge @ 50% load and 27.2 VDC Float @ .5 amp load</li><li>Flooded/AGM: 28.4 VDC Charge @ 50% load and 26.8 VDC Float @ .5 amp load</li></ul><p><strong>Compliance References:</strong></p><ul><li>UL: UL 1950 (per DNB report)</li><li>CG: USCG CFR 183.410 (Ignition protected)</li><li>EN: EN 60335-1</li><li>CE: Carries the CE mark</li><li>ABS: PT Series meets SVR 2009 4-8-3/5.9, Under 90 meters Rules 2006 4-6-4/7.19, and HSNC 2007 4-8-3/5.13.</li></ul><strong>This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.</strong> <!--- cis2:m2hqmpZo --->