CW61257

<p><strong>62 Series Marine Carbon Monoxide - White - Flush Mount - 12V with Relay &amp; Trim Ring</strong></p><p><strong>Features:</strong></p><ul><li>This unit comes with a trim ring&nbsp;to cover existing screw holes and fit newer units into previous installation cutouts.</li><li>NMMA Listed Component.</li><li>Space Saving design&nbsp;works in harsh marine environments.</li><li>Works in extreme temperatures.&nbsp;Only marine CO alarm listed to operational temperatures of -40&deg;F to 158&deg;F. The alarm has consistently held up in the excessive cold and heat due to the high-quality sensor.</li><li>No False Alarms&nbsp;due to new boat smell, outgassing, or non-hazardous levels of hydrocarbon gases encountered while boating. Interconnect and generator shut-off alarms are available.</li><li>Low Current Draw(37 mA). An innovative micro-current circuit saves battery power for the boater.</li><li>Alarm Mute with Auto Reset.&nbsp;With a press of a button, the mute circuit will temporarily silence the alarm while the boater ventilates the cabin. The alarm will reactivate if it still senses dangerous levels of CO.</li><li>End of Life Signal&nbsp;alerts boater to replace the alarm after 5 years of service.</li><li>Memory Scan.&nbsp;Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless the detector has memory.</li><li>The rapid recovery sensor resets when silenced or reactivates the alarm if dangerous levels of CO remain.</li></ul><p><strong>Specifications:</strong></p><ul><li>Conforms To ANSI / UL STD 2034*</li><li>* Testing Laboratory: ETL/Intertek</li><li>Alarm Point: 400 PPM 4-15 Minutes</li><li>Low voltage power warning at 7 Volts</li><li>Power Supply and Current Draw: 37 mA @ 13.8 VDC</li><li>Operational Range: 13.8 Volts +/-15%</li><li>Low voltage power warning at 7 Volts</li><li>Operating Temperature: -40&deg;F to +158&deg;F</li><li>Case Size: 4.5&Prime;W x 3.25&Prime;H x 1.25&Prime;D</li></ul> <!--- cis2:m2hqmpZo --->